Cool Dragon Head Drawings in Pencil

Download Commodity

Download Article

Drawing a dragon is a great style to prove your creativity, just it may be challenging to depict the caput considering it has a lot of detail. Luckily, you tin start sketching the caput with bones shapes before calculation in the features. Fantasy dragons commonly take pointier snouts and are the most common types in Western culture, while Chinese dragons have boxier heads. With a scrap of practice, yous'll exist able to describe whatsoever type of dragon head you want!

1. 1

   Depict a circle in the centre of your paper. Use a pencil and sketch your lines in lightly so you lot're able to erase them easily. Brand the circle in the heart of the page, leaving room on each side of it and so you have infinite to add together more features. The circle doesn't need to be perfectly round, merely you may utilise a compass to aid you describe your lines if you desire.^[ane]

   • The cartoon of the dragon caput will be in contour view when y'all're finished.
   • If you program on adding the residue of the dragon's torso to your drawing, then make sure the circle is minor enough so you can fit the body on your sheet of newspaper.
   • If you desire your dragon to accept a longer face up, then make a horizontal oval instead of a circle.

2. 2

   Add a rounded trapezoid on the side of your circle for the dragon'southward snout. Choose either the left or right side of the circle depending on which way you want the dragon head to face. Draw the top horizontal line of the snout coming from the top of the circle so it's the aforementioned length as the circle's diameter. Make some other horizontal line coming from the bottom of the circle to brand the bottom of the snout. Connect the 2 lines so the corners are rounded.^[two]

   • Yous can make the snout longer or shorter depending on how you want the dragon to look.
   • Don't leave precipitous corners on the stop of the snout or else your dragon won't await natural.

   Ad

3. 3

   Make parallel lines coming out the bottom of the circle for the dragon'due south neck. Outset one of the lines where the lesser of the snout connects to the head. Make a curved line coming down from the head as long as you want it. And then depict another curved line that's parallel to the offset i on the opposite side of the caput.^[3]

   • The dragon'south neck usually gets wider closer to its torso, so y'all tin can make the lines get further apart near the bottom if you lot desire to.

   Tip: Add together a neck even if you don't programme on drawing the rest of the dragon's body. That mode, the head volition even so accept the illusion that it's connected to something.

4. 4

   Sketch a curved horizontal line through the trapezoid to make a oral cavity. Start drawing the mouth in the heart of the trapezoid'southward narrow end. Extend the line horizontally then it ends virtually the centre of the dragon'south head. Curve the stop of the mouth up if you lot want your dragon to await like it'south grin, or angle it down if you desire it to frown.^[four]

   • Put a parallel line underneath the mouth if y'all want it to look like your dragon has a bottom lip.

5. 5

   Depict triangles coming out from the mouth to give your dragon teeth. You can either add teeth that point upward or downwards along your dragon'due south oral cavity. Cull anywhere along the mouth and describe a triangle that points up or downwards starting from the mouth line. Add 5-half-dozen separate teeth in your dragon'south mouth and then it looks more than fearsome.^[5]

   • Don't line the entire oral fissure with teeth or else your drawing may starting time to look messy.
   • You lot can have teeth pointing both upward and downwardly.

6. vi

   Put a circumvolve or triangle above the mouth to make an middle. Identify the centre side by side to where the height of the snout connects to the side of the circumvolve. If you want your dragon to wait more realistic, draw a small circle for the center so in that location's a small-scale gap betwixt it and the pinnacle of the snout. For a dragon that looks angrier, add together a horizontal triangle and then the point faces the snout.^[half-dozen]

   • Don't make the eye also large or else you won't have room to add together other features.
   • Search for pictures of other reptiles to see what their eyes wait like so y'all can utilise them as a reference.

7. 7

   Add bumps and ridges on the top of the dragon'southward head for more texture. Dragons don't have smooth skin, and then their heads volition look bumpy and knobby from their scales. Utilize the outlines you lot currently accept as guides and become over them to add curves to the snout. Utilize wavy or zig-zag lines going from the end of the snout toward the back of its caput.^[7]

   • For case, you may add a big crash-land higher up the dragon's eye if you want to give it a prominent brow.
   • Y'all tin can add equally many or as few bumps and ridges to the dragon depending on how y'all want it to wait.

8. 8

   Give your dragon horns if y'all want to. If yous desire to add horns to your dragon, make a vertical line extending out from the top of the dragon'southward head. Extend the line out and so information technology's about the same length equally the snout. Add together another line that starts on the back side of the dragon's head and connects to the end of the first line to complete the horn.^[8]

   • Brand the horn shorter if you lot want to make information technology seem like your dragon is younger.
   • Y'all can brand the horns any shape you want. Wait upwards horns on real animals to become influences for what you can include on your dragon.
   • You may besides choose to add horns or spikes running down the back of the dragon'south neck if yous want to.

9. nine

   Erase the lines you used as guides. Get over your drawing with an eraser and get rid of any lines that aren't even so a part of your dragon. For instance, you may erase the circumvolve or the original outline of the snout if you added more bumps to it. Continue erasing any guides or mistakes you lot fabricated, and blow off the shavings when yous're finished.^[nine]

   • Darker lines will be harder to erase than lightly sketched lines.
   • Get a clickable detail eraser if you demand to erase lines in small areas. You tin can get special erasers from an fine art store or online.

10. 10

    Add together details similar scales and nostrils to brand your dragon seem realistic. One time yous erase the guide lines, start adding the last details into your drawing. Start with minor ovals or circles for the nostrils at the cease of the snout. In one case you add the nostrils, draw in U-shaped lines on the sides of the dragon'southward caput and down its neck give the illusion of scales.^[10]

    • You don't need to draw every scale on the dragon's face since information technology could brand your drawing look messy or unclear.
    • Shade your cartoon with a pencil or colored pencil if you lot want to add more perspective or color.

11. 11

    Finished.

    Advertisement

1. 1

   Make a circle with a rounded rectangle for the dragon'south head and snout. Start by making a circle in the middle of your slice of paper so you take room to add together features on each side. Choose the right or left side of the circle to put the snout depending on what direction yous want the dragon to face. Start the rectangle halfway down from the top of the circle and connect the bottom edge to the lowest point of the circle.^[11]

   • You tin cull to make the dragon's snout thicker if yous want.
   • When you're finished, your dragon head volition be in contour view.
   • Sketch your lines lightly at first and then y'all can easily erase them later on. Otherwise, y'all'll leave marks on the paper that yous tin can't become rid of.

2. 2

   Sketch in the dragon's neck coming out from the other side of the caput. Start a line at the indicate where the bottom of the snout touches the circle. Curve the line slightly down so it looks like information technology extends off of the page. Draw the top of the neck coming from the elevation side of the circle so information technology'south parallel with the first line y'all drew.^[12]

   • While you don't have to draw the cervix for your dragon, information technology adds to the illusion that the head is continued to a body.
   • Chinese dragons have long, snake-like bodies, so the neck volition stay the same thickness the entire time.

3. 3

   Draw a horizontal line and triangles to give your dragon a mouth and teeth. Start the line for the mouth so it'due south a third of the mode upwardly from the bottom of the rectangle. Make a slightly curved horizontal line that ends near the middle of the dragon'southward head. Draw small triangles coming out from the acme or lesser of the line to give the dragon sharp teeth.^[xiii]

   • Requite your dragon a smile if you want it to look happy or a pout if you want it to appear more vehement.
   • Merely add a few teeth to the rima oris so the drawing doesn't wait messy.

4. iv

   Add a circle or oval above the mouth for your dragon's eye. Place the eye for your dragon inside the circle so it'southward next to where the elevation of the snout connects to the head. Brand a circle or a horizontal oval for the eye and so there's a small gap betwixt information technology and the top of the head. Add an angled line higher up the eye to requite your dragon an angry brow.^[xiv]

   • The dragon'due south pupil can be round like a human, or y'all can make it look like a slit, like to a snake or cat.
   • Don't make the eye likewise large or else the dragon will wait unnatural and you lot won't accept room to place the balance of the features.

5. 5

   Draw antlers or horns on top of your dragon'due south caput. Chinese dragons usually accept antlers that look like a deer, but they can also have standard spiked horns. If you desire to add antlers, Draw a Y-shape coming out from the dorsum of the dragon'south head. Add together lines on either side of the Y-shape so the antler ends in curved points. If y'all desire to make horns, depict a long triangle coming out from the back of the dragon's head instead.^[15]

   • You don't demand to add antlers or horns at all if you don't desire to.

6. vi

   Sketch in ears underneath the antlers. Different many other dragons, Chinese dragons have ears on the sides of their head that look similar to cow or deer ears. Describe a curved line coming out from the side of the dragon's head and extend it so it'south virtually one-half as long as the head's bore. Add together another curved line underneath the first one and connect the ends to make the ear.^[sixteen]

   • You don't need to describe the ear on the other side of the head since you wouldn't be able to see it from this perspective.

7. vii

   Give your dragon a beard and mane. Chinese dragons have hair and manes around their heads that resemble a lion. Put in wavy lines that terminate in points around the bottom of the snout and the back of the head. Draw the pilus in tufts rather than adding the individual strands and so your drawing doesn't get muddled.^[17]

   • The mane will go behind your dragon'south horns or antlers if it has them.
   • You tin make the hair every bit long or brusk equally you want.

8. eight

   Erase the guide lines that aren't a role of your dragon's caput. Use the eraser on your pencil or a block eraser to clean up the lines on your drawing. Erase whatever of the lines that yous were using as guides, such as the sides of the circle or parts that are overlapped by hair. Continue getting rid of lines you lot don't demand in your drawing anymore and accident the shavings off when yous're done.^[18]

   Alarm: Don't wipe the drawing with your hand when y'all're washed erasing your lines since you could easily smudge the pencil.

9. ix

   Add nostrils and whiskers to the snout. Put in minor circles or ovals near the front of the snout for your dragon'due south nostrils. Get out a small gap beside the nostril earlier drawing a long wavy line that ends about the back of the dragon's head. Make some other parallel wavy line straight underneath the showtime one and connect the ends to add together the whisker.^[19]

   • Draw pocket-size smoke clouds coming out from the dragon's nostrils if you want to brand information technology seem like information technology's near to breath fire.
   • Shade your drawing with your pencil to make information technology look more realistic and add perspective.
   • Use colored pencils if you want your dragon to look more colorful.

10. 10

    Finished.

    Advertisement

Add together New Question

• Question

  Why would I try shading the drawing rather than redoing the colour?

  

  Shading makes the art look more real. Redoing the color makes information technology look more similar a cartoon.

• Question

  What if this is difficult for me?

  

  Jacquelyn Helmuth

  Community Answer

  Attempt sketching information technology lightly and utilise the picture of the dragon you desire to draw. Then, lightly draw what you see and, if you happen to become the shape you want, describe a little darker. With do, you will better.

• Question

  How do you make epic scenes with dragons that Popular out at you?

  

  Utilise dramatic shading. For instance, if your dragon is facing slightly left, add shading nether its chin, along its cervix, at the left end of its eyes, and at the base of its horns.

• Question

  How do I draw a dragon's centre?

  

  Draw a more rounded outline than that of a human being, more like a cat'southward heart. Give the center a sparse, curved pupil. Add shading to suggest a colored iris and environment the eye with scales.

• Question

  What would be a good groundwork for a dragon?

  

  Tokayyoshi

  Customs Respond

  If it'due south a fire-breathing dragon, add flames! If your dragon lives in the body of water, draw fish, coral, and bubbles.

• Question

  How can I make a fatigued dragon announced lifelike?

  

  Add lots of shading, i.due east., describe where the lighting would bear witness.

• Question

  I could non describe these without running into a problem. Is there an easier fashion?

  

  It depends on your level of ability. If y'all want simpler processes, y'all can start with easier dragons and build upwards from there.

• Question

  How would I describe a frill?

  

  Frills look like smaller versions of wings that are fastened to the head. Just await at wing references and size them downward. If you demand a better visual, tissues and pipe cleaners will assist you get the positioning right.

• Question

  Is there a simpler way to depict the dragon'due south horns?

  

  You can make two wavy lines that connect at the top and course a point, and if that doesn't piece of work, you tin can make a stretched triangle with some overlapping pare at the base.

• Question

  How do I depict a cave for my dragon?

  

  You can draw a cave by drawing a rocky circle and adding shading in the background, darkening as y'all go deeper. Effort to make the cavern walls uneven, and if you lot want, add some hanging rocks, rocks hugging the cave wall, etc. Grey or brown would be good default colors, simply you can add multiple colors if yous want to include glowing jewels and gems.

See more answers

Enquire a Question

200 characters left

Include your electronic mail accost to get a message when this question is answered.

Submit

Advertisement

Video

• Use pictures of other animals for reference if you want to make your dragon more than unique or add unique features. For example, you can requite your dragon a beak like a turtle or a

Thanks for submitting a tip for review!

Advert

Things You'll Need

• Newspaper
• Pencils
• Eraser
• Colored pencils (optional)

About This Article

Article Summary Ten

To draw a dragon head using shapes, start past cartoon 2 circles close together to make the eyes. Then, draw ii wedge-like shapes for the snout, and sketch the neck using long, curvy lines, similar to the epitome of a snake. Next, use triangles and trapezoids to shape the dorsum of the head, and depict cones and mounds to represent parts like the horns or locks of pilus. Afterwards, refine the lines and add details such equally fins and spikes. Finally, erase any unnecessary lines and color your dragon as desired. To learn more, including how to draw a dragon head using animal references similar goats and crocodiles, read on.

Did this summary assistance y'all?

Thanks to all authors for creating a page that has been read 561,127 times.

Did this article help you?

churchillupocand.blogspot.com

Source: https://www.wikihow.com/Draw-a-Dragon-Head

Share this post